Runaway Chemical Reaction and Vapor Cloud Explosion Literature review

Runaway Chemical Reaction and Vapor Cloud Explosion - Literature review Example The drive needs to be sorted before the start of any reaction process to control the explosion incidences. In addition, during the polymerization process, the people concerned should ensure that there is required amount of polymers and monomers to reduce the reaction process. When unequal amounts of polymers and monomers are used, there can be rapid increase in reaction pressure in reactors manways enabling solvent vapor to be forced out as a flammable cloud Carolina (CSB 2007, p. 2). In most cases, it has been noticed that when the ejected vapor comes into contact with the source of ignition, it results in explosion thereby can lead to killing of workers and several harms. Such killings and deaths need to be controlled by the workers themselves and some organization bodies. The Chemical Safety Board (CSB) should ensure the workers are familiar with basic safeguards tips that prevent, detect and moderate runaway reactions. Moreover, the Board should also ensure that all safety management practices are operating all time. Most preferably, people should reside quite distance from main firms that are involved in several reaction tests. During the process of reaction that may at times leads to severe explosions may cause injuries to the nearby homes Carolina (CSB 2007, p. 3). Some blasts may go beyond the borders causing damage of structures of the nearby residents. The most important necessity for all companies that are involved in chemical reaction processes is a quick mode of transport. Ambulances owned by these firms create immediate access to medical checkups. The injured workers can be transported to various hospitals depending on the nature of harm. The burned labors are taken to burn centers for better treatment. In order to get a complete manufacturing cycle, several reaction steps must be followed. All the levels should be monitored by the operators Carolina (CSB 2007, p. 5). In order to achieve appropriate and successful manufacturing cycle, there